Skip to content

Heating Repair in Campbell, CA

Serving Campbell and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (669) 274-2169

The short answer

ArcticFlow AC Repair fixes gas furnaces and heat pumps in Campbell homes (ZIP 95008) from our base in Santa Clara, about 6 miles away. We find the problem, explain it in plain terms, and tell you what the repair involves before we start. Bay Area air rules don't require you to replace a working furnace, so repair is often still a sensible choice.

When the heat quits in Campbell, it rarely happens on a convenient day. The Santa Clara Valley has mild, damp winters, so many furnaces and heat pumps sit idle for months. Then they have to run every morning and evening once the cold, wet weather settles in. That sudden workload is when worn igniters, clogged filters, and tired blower motors tend to show up. ArcticFlow AC Repair is based in Santa Clara, about 6 miles north of Campbell. We repair gas furnaces, heat pumps, and other forced-air heating systems in homes throughout the 95008 ZIP code.

Heating Problems We Fix in Campbell Homes

Most heating calls start with one of a handful of symptoms. When you call, tell us what you're seeing or hearing. That helps us bring the right parts and plan the visit.

  • Furnace runs but blows cool or lukewarm air
  • System won't start at all, or the thermostat screen is blank
  • Burners light, then shut off after a few minutes (short cycling)
  • Ignition or pilot problems on gas furnaces
  • Banging, squealing, rattling, or grinding from the blower or ductwork
  • Heat pump iced over, stuck in defrost, or not switching into heat mode
  • A burning or dusty smell that doesn't fade after the first run of the season
  • Uneven heat, with some rooms warm and others cold

If You Smell Gas

If you smell gas (a rotten-egg odor), leave the house right away. Call your gas utility or 911 from outside before you call any repair company.

What Happens During a Heating Repair Visit

Our technician starts by asking what you noticed and when it started. Then they check the thermostat, power, and filter before opening the equipment.

On a gas furnace, that usually means testing the igniter, flame sensor, pressure switch, inducer motor, and limit switches. The technician also looks at the heat exchanger area and venting for signs of trouble.

On a heat pump, we look at the outdoor unit, reversing valve, defrost controls, refrigerant circuit, and the indoor air handler.

Once we find the cause, we explain it in plain terms. We tell you what the repair involves before any work begins. If a part has to be ordered, we'll say so. We'll also tell you whether it's safe to run the system until the part arrives.

Repair or Replace? What Bay Area Air Rules Mean for Your Furnace

Many Campbell homeowners ask whether new air quality rules will force them to replace a working furnace. They won't. The Bay Area Air District's appliance rules do not require you to replace working equipment. They only apply when an existing furnace fails or is replaced. Repairing your current furnace is still a reasonable choice when the fix makes sense for the system's condition.

Looking ahead, Air District Rule 9-4 requires gas furnaces made from 2029 on to meet a zero-NOx emission standard. In practice, that points homeowners toward heat pumps when they replace a furnace after that date. If your furnace is older and needs a major repair, it's worth knowing this before you decide.

If you're considering a heat pump, check BayREN and your local clean energy provider for current incentives. Amounts change with each funding cycle, so we confirm the current offer before including it in any quote.

The federal 25C tax credit covered heat pumps placed in service before December 31, 2025. It does not apply to new installations now.

Simple Checks Before You Call

A few quick checks can save you a visit or help us find the problem faster:

If all of these look fine and you still have no heat, it's time to call a technician.

  • Make sure the thermostat is set to Heat and the temperature setting is above the current room temperature
  • Replace the thermostat batteries if the display is dim or blank
  • Check the circuit breaker for the furnace or air handler, plus the switch near the furnace that looks like a light switch
  • Look at the air filter. A badly clogged filter can make the furnace overheat and shut off
  • Make sure the furnace door panel is fully closed. A safety switch keeps the furnace off when the panel is loose
  • Clear leaves and debris away from an outdoor heat pump unit

Heating Repair Around Campbell

We're based in Santa Clara, so Campbell is a short drive for our team. We also repair heating systems in nearby Monte Sereno, Los Gatos, Saratoga, Cupertino, and Sunnyvale. If you have family or a rental property in those areas, the same team can help there too.

More services in Campbell

Related

What to expect

How a visit goes

  1. We find the cause first

    Before we replace a part or suggest new equipment, we test the system and pin down what's actually wrong. You get an explanation of the problem, not just a fix.

  2. We lay out your options

    When there's more than one reasonable path, such as repairing an older furnace versus moving to a heat pump, we explain the trade-offs so you can decide what fits your home and plans.

  3. We check incentives before quoting them

    Heat pump and electrification incentives through BayREN and local clean energy providers change from one funding cycle to the next. We confirm what's currently offered before we mention it in a quote.

FAQ

Common questions

Don’t see your question? Call (669) 274-2169 and we’ll talk it through.

Do you repair heat pumps as well as gas furnaces?

Yes. We repair gas furnaces, heat pumps, and the air handlers and controls that go with them in Campbell homes. That includes heat pumps that won't switch into heat mode or keep icing over.

Will I have to replace my gas furnace because of the Bay Area Air District rules?

No. The Air District's appliance rules don't require replacing working equipment. They apply only when an existing furnace fails or is replaced. Under Rule 9-4, gas furnaces made from 2029 on must meet a zero-NOx standard. That mainly affects what you buy when you replace a furnace after that date.

Is it worth repairing an older furnace?

It depends on the system's overall condition and what the repair involves. We'll explain what's wrong, what fixing it involves, and what else we noticed. That way you can weigh repair against replacement with the full picture.

Can I still get a federal tax credit for a new heat pump?

Not for new installations. The federal 25C credit covered qualifying heat pumps placed in service before December 31, 2025. You can check BayREN and your local clean energy provider for current incentives. We confirm the current offer before quoting it.

Why does my furnace smell like burning dust when I first turn it on?

Dust settles on the heat exchanger and burners while the furnace sits idle. A short burning-dust smell on the first few runs is common. If the smell lingers, smells electrical, or comes with shutdowns, call for a repair. If you smell gas, leave the house and call your gas utility or 911 from outside.

Do you serve areas near Campbell?

Yes. Besides Campbell, we provide heating repair in Monte Sereno, Los Gatos, Saratoga, Cupertino, and Sunnyvale, from our base in Santa Clara.

Tell us what your system is doing

Describe the problem, whether it's warm air from the vents, a furnace that won't start or a strange noise, and we'll schedule a technician to diagnose it and explain your options.

Call (669) 274-2169 Request Service